Question
Please tell me how to change the criteria for changes to be applied with [Color] - [Reflect node changes to selected clips] or "Reflect node changes to current group". Even if you use it, the changed value will be copied and reflected as is. Is it possible to do something that reflects the percentage of change or the difference in change?Answer
This can be changed in "Ripple Mode" under "Color" on the "User" tab in [Preferences].In addition, this menu is described in the reference manual as a behavior setting for the "RIPPLE VALUE" button in the Advanced Panel, but it works even in environments where it is not used.
Perhaps because of this, when I read the reference manual, DaVinci Resolve Advanced Control Panel is required to change the mode of [Color] - [Reflect node changes to selected clip] or "Reflect node changes to current group" There is a statement that says. However, it can be used even without it.
By the way, in the DaVinci Resolve Advanced Control Panel, you can switch the settings as follows using the menu on the panel called "RIPPLE MODES".
The corresponding environment setting items are also listed. -Advanced Panel: Ripple Static (change the exact value)
Environment settings: Reflect the changed value
the A clip contrast from 1.0 to 1.5, then
the B clip contrast from 2.0 to 1.5
-Advanced Panel: Ripple Relative: (change the percentage value) :Reflect the value change as a percentage
Environment settings: Reflect the changed value
If A clip contrast is changed from 10 to 15,
B clip contrast is changed from 20 to 30
-Advanced Panel: Ripple Absolute: (Change unit value)
Environment settings: Changed value
you change the A clip contrast from 10 to 15,
the B clip contrast will change from 20 to 25
-Advanced Panel: None
Preferences: Copy all values
A clip tint 0.00 (no change) If you change the contrast from 10 to 15,
B clip tint 0.10 →0.00 contrast 20→25
Reference 18 Reference Manual
P.105 Ripple Mode
P.3031 Applying adjustments to multiple clips